MacWorld 1997: The Complete Utilities Toolkit

home *** CD-ROM | disk | FTP | other *** search

/ MacWorld 1997: The Complete Utilities Toolkit / macworld-complete-utilities-1997.iso / Comms ⁄ Networking / NET Mac / version.c(2.3.58) < prev

Wrap

Text File | 1996-02-17 | 91.8 KB | 1,571 lines | [TEXT/KAHL]

/* version control information */ #include "global.h" #include "config.h" char version[] = "NET/Mac 2.3.58"; /* * What this application is intended for: * ====================================== * NET/Mac is an application, that has been created for ham-radio operators. * It can be used to hook up a Macintosh to the amateur-radio 'packet-radio' * wireless network. NET/Mac supports the TCP/IP protocolstack. * * If you want to get acquainted with TCP/IP over packetradio, then I suggest * you read the book: NOSintro, TCP/IP over Packet Radio. It has been written * for the PC world but PC's and Macintoshes mix well in this area. The author * of the book is Ian Wade, G3NRW, ISBN: 0-897649-00-2. * * To use NET/Mac you need: * a) a ham-radio license * b) a transceiver connected to an antenna * c) a TNC that supports the KISS protocol * (A TNC is like a modem... A modem however drives a telephoneline, while * a TNC drives a transmitter and receiver...) * d) a Macintosh 512 or newer * e) a complete working environment for NET/Mac, which consists of directories * for mail, logfiles etc. and some configuration (example-)files. Also you * need Ivo ON1XK's mailer (IM/Mac). Usually you can download this from the * same place you downloaded NET/Mac from. Look for the files that carry * names like: 'IM_Mac_<verion-number>.sea.hqx' and 'radio-config.sea.hqx' * (also seen around as: radio-environment.sea.hqx). Sometimes even the word * 'radio-' isn't there. * New versions always get downloaded to: * - sumex-aim.stanford.edu (directory: info-mac/comm) * - ftp.ucsd.edu (directory: pub/hamradio/packet/tcpip/incoming) * * History * ======= * The application NET/Mac, was ported (from Phil Karn's NET) to the Mac * by Dewayne Hendricks, WA8DZP. * * This release is based on Dewayne's NET/Mac 2.0 and contains all mods of * the newer NET/Mac 2.2. Both NET/Mac 2.0 and 2.2 were released by Dewayne * Hendricks and Doug Thom. Since some time I have been making mods (bug- * fixes and enhancements) to their NET/Mac, and have always sent them these * mods. Now that they are working on a new application, that will support * high speed networks and will also support AppleTalk over that network, * they have given me permission to distribute their NET/Mac with my mods * installed. * * I hope you'll like the work I have done so far, and I will try to keep * 'upgrading' this application as much as possible. Don't bother Dewayne * or Doug in case you have problems or questions. Don't hesitate to call * me if any help is needed. I will try to be as helpful as I can. If you * want to become member of a 'NET/Mac distributionlist' (I myself prefer * internet for sending out newer versions...) then please leave me a note. * I may start sending out UpdateMaker documents that will allow you to * update NET/Mac to a newer version as soon as one has become available. * * I'd like to thank Dewayne and Doug for the sources they gave me to work * on and Joe AF2J for already sending me a number of mods. * * Adam van Gaalen, PA2AGA. * * * My mail addresses are: internet: pa2aga@iag.tno.nl (for letters only!) * or: a.vangaalen@iag.tno.nl (for files/letters) * ham tcp/ip: pa2aga@pa2aga.ampr.org (44.137.33.4) * ham BBS: pa2aga@pi8vnw.#zh2.nld.eu */ /* Modifications I made so far: + = installed some time ago * # = installed in version # * #R= installed in Release 2.3.# * * File Modification * ---- ------------ 58 arpcmd.c Make syntax of error- and usage-messages more consistent 59 Make syntax of error- and usage-messages more consistent 60 Make syntax of error- and usage-messages more consistent 73 Implement fixes for more 'Real-Time processing' 47R Show hostnames in ARP console-output 48R Tailor ARP console-output + arpdump.c Support 'trace <interface> <bits> [filename]' 73 arp.c Implement fixes for more 'Real-Time processing' 14R Mods for new AppleTalk drivers,including FastPath/GatorBox support 50 ax25.c Taken from V2.2 78 Make sure pullup() gets called with the right parametertype 12R Add the name of the interface to output of 'ax25 heard' command 14R Check the result of the time() function 16R Correct #include for unix.h 58R Some mods for ROSE (by Joe K5JB, I forgot these mods in 2.3.47) 47R ax25.h Some mods for ROSE (as suggested by Joe K5JB) + ax25cmd.c Tailor 'ax25 heard' output + Mods for UPLOAD command 42 Do flowcontrol for incoming lines and those typed 31 Force 'Connected' message to AX.25-window 46 Do extended logging 48 Incoming sessions draw more attention than incoming mail 58 Make syntax of error- and usage-messages more consistent 59 Make syntax of error- and usage-messages more consistent 60 Save some space by moving some strings to 1 variable 67 Cursors should appear only if typing in a window is allowed 68 Implement split-windows for TELNET, AX.25 and NET/ROM 72 Change code so that it becomes more ANSI-like 73 Update ax.25 window when state changes 73 Implement fixes for more 'Real-Time processing' 78 Update ax.25 window when state changes (1st mod was not enough) 10R Force window-updates only if NET/Mac is not suspended 12R Add the name of the interface to output of 'ax25 heard' command 15R Return resultcode 0 if all was OK 16R Correct #include for unix.h 19R Mods for correctly displaying the systemprompt 34R Print number of ignored bad-header-frames 44R Save some space in 'ax heard' output 48R Implemented new command 'axtext [<message>]' 49R Fixes for 'axtext [<message>]' 49R Tailored some error-messages 49R Set minimum T2 timer to 250 mSecs. 1000 was too high for 9600 bps + ax25dump.c Support 'trace <interface> <bits> [filename]' 52 Support 'traceonly [all|callsign]' 78 Make sure pullup() gets called with the right parametertype 50 ax25subr.c Taken from V2.2 78 Make sure pullup() gets called with the right parametertype 29R Implemented 'ignorebadheaders [on|off]' command 30R Some more mods for 'ignorebadheaders [on|off]' command 33R Some more mods for 'ignorebadheaders [on|off]' command 34R Some more mods for 'ignorebadheaders [on|off]' command 45R Enhance the test for bad AX.25 headers + ax_mbx.c Do not include '.bbs' in from-field of mbox-message + Fix bug in 'mbox' output 21 Enhance test for control-z (for those that send cr + lf) 38 removed.. Make sure mailfiles are sent 'first in first out' 46 Do extended logging 47 Retransmit menu when an errormessage was sent out 58 Make syntax of error- and usage-messages more consistent 59 Make syntax of error- and usage-messages more consistent 60 Make syntax of error- and usage-messages more consistent 73 Notify users in case their LFADD is ON in their AX25 TNC 78 Make sure pullup() gets called with the right parametertype 14R Check the result of the time() function 18R tmpfile() should be tmpfile(0) or mbox mail will never be deleted 27R Say goodbye when the user issued the B)ye command 34R Enhancements for hop-to-hop delivery of reply-mail-files 47R Some mods for ROSE (as suggested by Joe K5JB) 50R callsign.h Mods for AmSoft CD-ROM 58 cmdparse.c Force Usage:-messages to correct window 22R Force Usage:-messages to correct window 26R croft.c Added some comments to the sourcecode 44R Allow a FORCE of a kind-of-illegal IP-number on AppleTalk 23R files.c Define the 'universal' temp file and dynamic alias file 23R Remove definitions for bm.rc, they're not needed 32R Correct strange behaviour of consolecommands pwd, cd and dir 55 fingcli.c Log outgoing finger-session 58 Make syntax of error- and usage-messages more consistent 60 Save some space by moving some strings to 1 variable 67 Cursors should appear only if typing in a window is allowed 68 Implement split-windows for TELNET, AX.25 and NET/ROM 21R Log reason for closing a session in case of networkproblems 41R Allow recording of finger-sessions to a file 44R Display transmissiontime and -speed at the end of an ftp get/put 41R finger.h Allow recording of finger-sessions to a file 24 fingserv.c Callsign instead of ip-number in 'being fingered' message 48 Incoming sessions draw more attention than incoming mail 55 Log closing of finger-session 65 Allow any user (username * and password * in ftpusers) 78 Make sure pullup() gets called with the right parametertype 15R Return resultcode 0 if all was OK 19R Mods for correctly displaying the systemprompt 19R Finger-files no longer need a .txt extension 78 ftp.c Make sure pullup() gets called with the right parametertype 14R ftp.h Implemented mods for password blanking 55 ftpcli.c Log outgoing ftp-session 58 Force Usage:-message to correct window 58 Make syntax of error- and usage-messages more consistent 59 Don't ring a bell when alerts is set to 0 bells 59 Make syntax of error- and usage-messages more consistent 60 Make syntax of error- and usage-messages more consistent 60 Save some space by moving some strings to 1 variable 67 Cursors should appear only if typing in a window is allowed 68 Implement split-windows for TELNET, AX.25 and NET/ROM 73 Update ftp window when state changes 10R Force window-updates only if NET/Mac is not suspended 14R Implemented mods for password blanking 15R Mods for Password-blanking 15R Return resultcode 0 if all was OK 21R Log reason for closing a session in case of networkproblems 41R Mods to prompt for username and password 42R Fix for mods that prompt for username and password 43R Fix for mods that prompt for username and password 78 ftpserv.c Make sure pullup() gets called with the right parametertype 82 Eventually supply 'ftpusers' with the right Icon 09R Do the Icon-change based on the new 'netmacicons' command 14R Check the result of the time() function 15R Return resultcode 0 if all was OK 19R FTP-users can no longer do a 'cd' to a file 23R For incoming FTP-sessions send out FTEXT1 and FTEXT2 24R Fix bug that crashed NET/Mac when receiving a 'cd ..' 25R 'cd ..' is the same as 'cd ::' now 28R FTEXT1 and FTEXT2 will now be output according to the standards 29R Shorten the FTP welcome message.. it's nicer now (I hope)... 48R Moved some local debug-mods to separate files 49R Allow double-quotes in ftpusers-file. Needed for like: "John's HD" 54R Some cosmetic mods for netmacicons 55R Introduce FTP-commands 'ascii' and 'binary' 55R Support 'ftext3 [<text>]' and 'ftext4 [<text>]' commands 55R Force ARPA-net date-format the FTP-welcome message + heard.h Tailor 'ax25 heard' output 12R Add the name of the interface to output of 'ax25 heard' command 42R icmp.c Support 'rdate' command 43R Some minor mods for the 'rdate' command 51R Allow variable length ping-packets + icmpcmd.c Add callsign to 'ping' output 73 Implement fixes for more 'Real-Time processing' 19R Mods for correctly displaying the systemprompt 19R Make syntax of error- and usage-messages more consistent 27R Allow 'reset' to be the 2nd parameter of a 'ping' command 42R Support 'rdate' command 43R Some minor mods for the 'rdate' command 46R Support 'adjustclock' command 47R Minor mod to the 'ping' console output 51R Minor mod to the 'ping' console output 51R Allow variable length ping-packets 51R Minor mod for the 'rdate' command 52R Fix a bug in the ping-command, that only shows on a Mac LC 53R Add hostname to 'ping' output + icmpdump.c Support 'trace <interface> <bits> [filename]' 60 iface.c Save some space by moving some strings to 1 variable 72 Change code so that it becomes more ANSI-like + ipcmd.c Tailor 'route' output + Add 'route expanded' command to see callsigns (not IP-#'s) 50 Tailor 'ip heard' output. Stolen from V2.2 57 Tailor 'route expanded' output 58 Make syntax of error- and usage-messages more consistent 59 Make syntax of error- and usage-messages more consistent 60 Make syntax of error- and usage-messages more consistent 60 Save some space by moving some strings to 1 variable 72 Change code so that it becomes more ANSI-like 73 Implement fixes for more 'Real-Time processing' 86 No need for \r before printing \n 41R Truncate hostnames that are too long to be printed 49R Fix for 'route add default ..'. I hope it works better this way 49R Support new command 'route window <hostname>' + ipdump.c Support 'trace <interface> <bits> [filename]' 14R Check the result of the time() function 63 ipheard.h Reduce ip-heard space to 22 (was 100) + iproute.c Mods for reboot-problem 56 Make sourcefile easier to read (0l -> 0L) 44R Removed some #ifdef's and #endif's 49R Support new command 'route window <hostname>' 73 ip.c Implement fixes for more 'Real-Time processing' 78 Make sure pullup() gets called with the right parametertype 44R Let UDP report 'port unreachable'... TRACEROUTE needs that... 49R ip.h Support new command 'route window <hostname>' 52R Increase routes-buffer for non Mac-512's 26R kip.h Some opcodes were defined to be int, changed those to long 63 kiss.c Allow like 'param ax0 KISS ON' on KISS-lines 64 Allow controlcharacters (^a, ^b etc.) to be sent to a TNC 64 Add stuff for Kantronics KPC-4 66 Redo of some tricky programming 86 Enhance ^<char> to control-character conversion 86 No need for \r before printing \n 58R Mods by DK2HD. Allow ^[ (escape), $d (date) and $t (time) 64 kpc.c Add stuff for Kantronics KPC-4 (new sourcefile) 22R Prepare source for compilation under Think C 4.0 78 lapb.c Make sure pullup() gets called with the right parametertype 21R Fix a minor AX.25 protocol error 22R Fix a minor AX.25 protocol error 23R Fix an error in these 'AX.25 protocol error' mods 47R Some mods for ROSE (as suggested by Joe K5JB) 22R lapb.h Fix a minor AX.25 protocol error + mac_about.c Correct #include to make the filename case-insensitive 00R Change versionnumber to 2.3.0 05R Change copyright notice 27R Change copyright notice 37R Change copyright notice 37R Add info about Text Capture FKEY 48R 1994 -> 1995 48R Replaced 'Text Capture FKEY v2.1' by version 2.3 58R 1995 -> 1996 in Copyright notice + mac_at.c Don't '#include trace.h' twice 59 Make syntax of error- and usage-messages more consistent 61 Make syntax of error- and usage-messages more consistent 70 Use new AppleTalk stuff 78 Make sure pullup() gets called with the right parametertype 14R New AppleTalk drivers,including FastPath/GatorBox support 14R Fix bug that drove RIP crazy 18R Remove 'applestat' command 23R Terminate errormessage with a newline 30R A quick and dirty attempt to solve the 'slow AppleTalk' problem 44R Inform us about a gateway if one is present indeed 44R Allow a FORCE of a kind-of-illegal IP-number on AppleTalk 50R ON1XK added a Timer-Task instead of the 'realtime stuff' + mac_at.h Correct #include to make the filename case-insensitive 70 Use new AppleTalk stuff + mac_atdump.c Correct #include to make the filename case-insensitive + Support 'trace <interface> <bits> [filename]' 56 'at_dump()' is called with 2 parameters, but has only 1 14R Implemented some fixes for the new AppleTalk drivers 73 mac_autoexec Added code to update the autoexec.net file 09R Do the Icon-change based on the new 'netmacicons' command 11R Don't update the autoexec.net of a 512K Mac 23R Do the Icon-change based on the 'netmacicons' command 23R Do some more errorchecking 23R Use the 'universal' temp file 50R ON1XK added a Timer-Task instead of the 'realtime stuff' 51R Fix some typo's in the sourcecode 52R Make NET/Mac aware of 'popmail' 54R Some cosmetic mods for netmacicons 21 mac_avail.c Returns available disk-space in ftp 'dir' command 40 Correct free-space info for large disks 41 Enhance free-space info for large amounts of free space 21R Fix for 512K Macs 22R Fix for old 512K Macs 58 mac_bcncmd.c Make syntax of error- and usage-messages more consistent 59 Make syntax of error- and usage-messages more consistent 60 Make syntax of error- and usage-messages more consistent 60 Save some space by moving some strings to 1 variable 72 Change code so that it becomes more ANSI-like 73 Implement fixes for more 'Real-Time processing' 58R Mod for 'beacon set' command 19R mac_binsubs.c Fixes for not properly closing MacBinary-files after ftp + mac_callbka.c Tailor callbook layout (European people don't have zip's) 14R Check the result of the time() function 15R Updated by WA8DZP for new Buckmaster CD 16R Support for encoded international database 17R Fix programming error that caused 1-character suffix to fail 18R Make sure licenses don't look like expired ones 18R The log should read AX25, not TCP/IP 50R Mods for AmSoft CD-ROM + mac_callbk.c Tailor callbook layout (European people don't have zip's) 14R Check the result of the time() function 15R Updated by WA8DZP for new Buckmaster CD 16R Support for encoded international database 17R Fix programming error that caused 1-character suffix to fail 18R Make sure licenses don't look like expired ones 18R Log hostnames, not ip-numbers 23R Add the missing linefeed behind the mail-address line 50R Mods for AmSoft CD-ROM 21 mac_files.c Add info about free disk space to ftp 'dir' command 59 Make syntax of error- and usage-messages more consistent 12R Fix pathnames for old Mac512 12R Show times in UTC when displaying a directory 19R Finger-files no longer need a .txt extension 21R More fixes for old 512K Macs 22R More fixes for old 512K Macs 23R More fixes for old 512K Macs 23R Remove definitions for bm.rc, they're not needed 23R mac_files.h Define the 'universal' temp file and dynamic alias file 23R Remove definitions for bm.rc, they're not needed 77 mac_fopenw.h Define width of scrollbars 04R mac_gestalt.c Prepare sources for Gestalt() 05R Assembler code for Gestalt()... Thanks Ivo! 09R Gestalt will no longer be compiled in the 512K version 09R Fixes for AddResMenu() bug in System 7.1 10R Fixes for Mac LC II under System 7.0.1 30R Include MacOS- and NET/Mac-versionnumbers in SMTP headers + mac_help.c Correct #includes to make the filename case-insensitive 09R Fixes for AddResMenu() bug in System 7.1 21R Force arrow-cursor when the HELP-window is active 22R Don't force an arrow-cursor on a Mac512 36R Fixes for AddResMenu() bug in System 7.1.1 41R Fixes for AddResMenu() bug in System 7.5 48R Fixes for AddResMenu() bug in System 7.5.1 51R Defaultbuttons are FAT buttons now 56R Fixes for AddResMenu() bug in System 7.5.3 63 mac_io.c Allow like 'param sl0 ATDT<phonenumber' on slip-lines 74 Although 'unsupported', support 38400 bps 86 No need for \r before printing \n 18R Flush the disk-cache before performing clr_tmpfiles() 18R Keep files that could not be deleted in the RemoveIt list 28R Prepare sources for support of 4-port serial card 29R Allow more than just one Hurdler serial card 32R Flush the disk-cache before Q)uit 32R Don't send a <RETURN> before the Hayes command: +++ 47R In case of I/O-errors also display interface-name 50R ON1XK added a Timer-Task instead of the 'realtime stuff' 55R Corrected 'just a typo' and some more minor things 58 mac_isescmd.c Make syntax of error- and usage-messages more consistent 59 Make syntax of error- and usage-messages more consistent 60 Make syntax of error- and usage-messages more consistent 73 Implement fixes for more 'Real-Time processing' 15R Return resultcode 0 if all was OK 73 mac_ises.c Implement fixes for more 'Real-Time processing' 08R mac_mactype.c Move Mactypes to a different segment, so we can unload it 09R Gestalt will no longer be used in the 512K version 10R Fixes for Mac LC II under System 7.0.1 and more 11R Don't compile this for an old Mac 512 xxR Added more machinetypes + mac_misc.c Mods for UPLOAD command 30 Support remote-reboot 56 New command: 'rip trace on' (by AF2J) 60 Save some space by moving some strings to 1 variable 62 Change name 'back_to_console' into 'lastActiveSession' 67 Mods for 'SMTP trace' window 67 Update 'lastActiveSession' when the user clicks a window 68 Implement split-windows for TELNET, AX.25 and NET/ROM 69 Mods for split-windows for TELNET, AX.25 and NET/ROM 83 Introduce 'User-defined' menu stuff 86 Allow \<char> for control-characters in a menu-item 04R Enable/disable Custom menu depending on frontwindow 06R The 'Custom' menu no longer uses the clipboard 14R Check the result of the time() function 18R Leave drawing of the MenuBar to mac_toolsevents() 22R Translate 2 backslashes in a menu-item into 1 slash 28R Disable 'Custom' menu when showing a 'Finger' session 32R NET/Mac handles a remote-reboot more gracefully 41R Password-protect 'remote <hostname> reset' command 50R ON1XK added a Timer-Task instead of the 'realtime stuff' 51R When sessions are open at Quit-time, ask Quit-permission 51R Defaultbuttons are FAT buttons now 51R Enhance the test for open sessions at Quit-time 58R 'addmenu' mod to allow APRS beacon formats. See HELP 60 mac_path.c Make syntax of error- and usage-messages more consistent 73 Make errormessages more helpful 12R Fix pathnames for old Mac512 15R More fixes for 512K Macs 17R Add conditional code for PA3ECP's Mac XL 18R Flush the disk-cache before calling clr_tmpfiles() 20R More fixes for 512K Macs 21R More fixes for 512K Macs 22R More fixes for 512K Macs 23R More fixes for 512K Macs 23R Define the 'universal' temp file and dynamic alias file 23R Remove definitions for bm.rc, they're not needed 29R Delete temp-files at startup 50R ON1XK added a Timer-Task instead of the 'realtime stuff' 23R mac_perform_at Implement 'perform <command> <HH:MM>' command 25R Change the syntax to: 'perform <command> <HH:MM>|+<delay> o|p' 27R Add command: 'perform clear', which clears the whole list 28R Modify the 'usage' message so that 'perform clear' is included 28R Display delay in minutes, not seconds 28R Fix for permanent commands with a +<delay> 35R New <dayofweek> parameter for 'perform' command 09R mac_realtime.c New... Draws and updates the statistics window 15R Enlarge realtime window 21R Fix for values bigger than maximum 50R ON1XK added a Timer-Task instead of the 'realtime stuff' 56 mac_rip.c New command: 'rip trace on' (by AF2J) 71 Fix some dirty sourcelines in rip_recv() 72 Make sure windows update properly even when not in front 73 Enhance mods of modset 72 73 Implement fixes for more 'Real-Time processing' 78 Stop sending out faulty RIP-packets 78 Solved a bug that made the Mac crash every now and then 79 Another bug solved in the RIP-receive code 80 Correct a typo, that destroyed RIP-interfaces 10R Force window-updates only if NET/Mac is not suspended 23 mac_ripcmd.c Tailor 'rip status' output 56 New command: 'rip trace on' (by AF2J) 59 Make syntax of error- and usage-messages more consistent 60 Save some space by moving some strings to 1 variable 67 Check RIP window when it is selected by a RIP TRACE command 67 Allow the user to define location and size of RIP window 67 Cursors should appear only if typing in a window is allowed 68 Check for valid hostname in 'rip' commands 04R Enable/disable Custom menu depending on frontwindow 15R Return resultcode 0 if all was OK 45 mac_tools.c If no window is a checked window, go to then console-window 53 Fix bug in above mod, that seemed to crash on a Macintosh LC only 57 Mod for the RIP Trace window.. check when clicked 60 Save some space by moving some strings to 1 variable 67 Mods for 'SMTP trace' window 67 removed.. Update 'lastActiveSession' when the user clicks a window 69 Mods for split-windows for TELNET, AX.25 and NET/ROM 74 Enable Paste-menu 77 Make sure we look at the correct window 80 Add a command-G option in the edit-menu 81 Make sure SetPort points to the FrontWindow 82 Fix SysEnvirons calls 83 Introduce 'Settings' menu 04R Enable/disable Custom menu depending on frontwindow 05R Some more mods to make sure the window we look at is the active one 09R Mods for the statistics window 10R Force window-updates only if NET/Mac is not suspended 11R When used on an old Mac512 assume non-adb keyboard 13R Disable 'Help...' menu when HELP is not available 17R Before going to the background try to switch to an arrowcursor 18R mac_toolsevents() will redraw MenuBar if necessary 21R Map option-command G and option-command V for non-ADB keyboards 28R Disable 'Custom' menu when showing a 'Finger' session 31R Implement recognition of disk-events 45R Mac-Tools.c was cleaned up by Ivo ON1XK 50R ON1XK added a Timer-Task instead of the 'realtime stuff' 45R mac_tools.h Mac-Tools.c was cleaned up by Ivo ON1XK 42 mac_ttydriv.c Do flowcontrol for incoming lines and those typed 56 Don't allow typing into the RIP Trace Window 57 Force ^R type-in to the right window (by AF2J) 67 Mods for 'SMTP trace' window 68 Implement split-windows for TELNET, AX.25 and NET/ROM 15R Mods for Password-blanking 38R Add support for 'Text Capture FKEY' for slit-windows 50 mac_whois.c Added. This file was taken from the V2.2 release 80 Display a watch-cursor when going through host.net 82 Slow down the rotating cursor 07R Show my picture when people ask who I am 09R Eventually supply 'hosts.net' with the right Icon 09R Do the Icon-change based on the new 'netmacicons' command 11R Never show my face on a 512K Mac 22R A lot of people want to know about ON1XK, so... 24R Call cursor routines in the right way 50R Defaultbuttons are FAT buttons now 51R Defaultbuttons are FAT buttons now 54R Some cosmetic mods for netmacicons + main.c Record StartUp time in LOG-file + Log callsign:socket, not ip-number:socket + Fix keyboard-locked bug + Support 'trace <interface> <bits> [filename]' + Fix doremote() + Allow list of autoexec.net-commands 22 Support 'log <filename> [overwrite]' 25 Write complete TRACE command to trace-file (for debugging) 26 Put machineType in smtp's share and enjoy message 28 Fix small problem in trace (NO trace but STILL a window) 34 Add more machinetypes (LC and Classic) 37 Add more machinetypes (IIfx and IIsi) 42 Allow flowcontrol for incoming lines and those typed 46 Do extended logging 46 Check parameters of 'flow' command 47 Enhance trace-mods; sometimes traceinfo goes to mailfile 50 Add 'whois <callsign | ip-number>' command (from V2.2) 50 Add 'hostfile <filename>' command (from V2.2) 52 Polish code for obtaining Macintosh type 52 Support 'traceonly [all|callsign]' 53 Show 'traceonly' values when starting to trace 58 Check for valid hostname in 'remote' command 58 Force Usage:-message to correct window 58 Make syntax of error- and usage-messages more consistent 59 Allow 'record|upload <filename> [<sessionnumber>] command 59 Make syntax of error- and usage-messages more consistent 60 Save some space by moving some strings to 1 variable 60 Make syntax of error- and usage-messages more consistent 61 Fix for current session-number and <escape>-key 62 Change name 'back_to_console' into 'lastActiveSession' 64 Add stuff for Kantronics KPC-4 65 Redo of the Mac-type recognition 65 New 'prompt' command implemented 66 Fix little bug in new 'prompt' command 66 Add more machinetypes (Quadra's, PowerBook's, Classic II) 67 Allow the user to define location and size of LOG window 67 Allow the user to define location and size of CONSOLE window 67 Cursors should appear only if typing in a window is allowed 68 Implement split-windows for TELNET, AX.25 and NET/ROM 68 Check for valid hostname in 'rip' commands 69 Fix SysEnvirons call 71 Implement 'rtntoses [on|off]' command 72 Change code so that it becomes more ANSI-like 72 Make sure windows update properly even when not in front 73 Slow down updating the tracewindow 73 Implement fixes for more 'Real-Time processing' 74 Enable Paste-menu 79 Make sure routing table is properly preset to NULLROUTE's 79 Implement console-commands 'date' and 'time' 80 Show a WatchCursor when going through autoexec.net 80 Add a command-G option in the edit-menu 81 Auto-adjust cursortype when the mouse has been moved 82 Balance the speed of the rotating cursor to the speed of the CPU 83 Some more cursor mods 83 Introduce 'Settings' menu 83 Introduce 'User-defined' menu and 'addmenu' command 84 Some more cursor mods 84 Change 'User-defined' to 'Custom' menu 84 Remove some obsolete sourcecode from PasteIfSomethingsThere() 84 Improve copying of commands to clipboard 85 Replace ' by " in menustrings 85 Implement 'source' command (mods by AF2J) 86 Put '#$debug on\n' in char debugOn[] 86 Check for invalid menu-string characters 00R Make syntax of error- and usage-messages more consistent 01R Mods for smtpndays 02R Fixes for 'Auto Operator' 03R Log 'Auto Operator' actions in the log-file, not the console 03R InactiveTimer implemented for sessions, that seem obsolete 04R Implement 'title' and change default console-title 04R Enable/disable Custom menu depending on frontwindow 04R Prepare sources for Gestalt() 05R Prepare sources for Gestalt() 05R Enable/disable Custom menu depending on frontwindow 06R The 'Custom' menu no longer uses the clipboard 07R Show inactiveTimer in 't s #' command-output 08R Prepare NET/Mac for the newer Macintoshes 08R Fix to make x and y parameters of Console command work 08R Move Mactypes to a different segment, so we can unload it 09R Mods for the statistics window 09R Implementation of new 'netmacicons on|off' command 09R Fixes for AddResMenu() bug in System 7.1 10R Force window-updates only if NET/Mac is not suspended 10R Support mail-delivery over AppleShare 11R HELP not defined? Tell the user about the HMgr resource 11R Enhance syntax-checking for 'appleshare' command 11R Fix problem with flashing HELP-balloons 11R Don't update the autoexec.net of a 512K Mac 11R Tell the user we need at least System 4.1 when no SysEnvirons 11R On an old Mac512 don't try to call SysEnvirons() 12R Show times in UTC when displaying a directory 13R Don't call UnloadSeg() on an old 512K Mac 13R Tell a Mac512 user which resources can be deleted 13R Check the result of the time() function 14R Enhance the CheckClock() routine 14R Implemented mods for Serial Line Framing Protocol 14R Improve some dirty programming 14R Show NET/Mac versionnumber in Consolewindow-title 14R Mods for Password-blanking 15R Mods for Password-blanking 15R Return resultcode 0 if all was OK 15R Implemented 'sesscreen [<width>]' command 16R 'sesscreen [<width>]' is now 'sesscreen [<width> [<length>]]' 16R Enhance checking of 'trace <interface> <mode>' command 16R Mods to support encoded international database 16R Support 'inquire <callsign>' command from console 17R Support 'callbookserver <hostname>' command 18R Make the System 7.1-MyAddresMenu-message conditional 18R Remove 'applestat' command 19R Forget about CPU speed in the Macintosh-type printout 19R The size of the trace-window can be defined in the trace-command 19R Make syntax of error- and usage-messages more consistent 20R Tell a Mac512 user which resources can be deleted 20R Take care of the Bus Errors that happened in 2.3.19 21R Support 'ctext1 [<text>]' and 'ctext2 [<text>]' commands 21R When using a non-ADB keyboard command-Q will not Quit NET/Mac 22R Hide the I-beam cursor until COPY from the menu is really there 23R Enhance checking for obsolete open sessions 23R Show '\\' as '/' in the Custom Menu Items 23R Implement code for 'perform [<command> <HH:MM> [once|permanent]]' 23R New command 'dontalias <user> [<user>] [<user>] ....' 23R Support 'ftext1 [<text>]' and 'ftext2 [<text>]' commands 24R Call cursor routines in the right way 25R Show the time after processing the 'tzone' command 25R Allow user to change the 'dontalias' definitions 26R The command 'smtpndays <#days>' is now 'smtp ndays <#days>' 26R Implemented new command 'softkiss' to enable SoftKiss fixes 28R Never change cursors when running in suspended mode 28R FTEXT1 and FTEXT2 will now be output according to the standards 28R Prepare sources for support of 4-port serial card 29R Implemented 'ignorebadheaders [on|off]' command 30R Sleep no longer (kind of) freezes the Mac 31R Log-messages should end with a <return>, not a <space> 31R The log- and callbook-log-file now have a NET/Mac icon 32R Prepare for longer Macintosh names (like: PowerBook Duo 270c) 32R Output <RETURN><LINEFEED> at end of CTEXT1 and CTEXT2 32R The 'tzone' command reads the offset from the Map controlpanel 32R The first socket.port is now 1024 (0 - 1023 seem to be reserved) 33R The timezone offset is available under System 6 too 33R The timezone sometimes was wrong when it was set more than once 35R New: 'reboot_on_bad_date' } These new commands were implemen- 35R New: 'sourcewhendone' } ted to make it easier to maintain 35R New: 'resetsmtpto' } an unattended slip-telephone-link 36R 'sourcewhendone' command incorrectly kept track of linkstatus 37R Some more improvements for the 'sourcewhendone' command 39R Mods for Power Macintosh models 40R Added 'chat' command 41R Make sure NET/Mac doesn't leave a watchcursor on the screen 41R Password-protect 'remote <hostname> reset' command 41R Change double linespace to single space in TRACE-files 41R Create new TRACE-files only when the traceflags are nonzero 41R Allow recording of finger-sessions to a file 42R Support 'rdate' command 43R The NET/Mac versionnumber will now be recorded to TRACE-files 44R The NET/Mac versionnumber will now be recorded correctly, ;-) 45R Mac-Tools.c was cleaned up by Ivo ON1XK 45R Enhance the reboot_on_bad_date decision method 46R Support 'adjustclock' command 46R Support 'fontsize' command 47R 'ttylink' command = 'chat' command 47R 'traces' command = 'trace' command, but packets are separated 47R Non-ADB-keyboard Macintoshes had 2 active 'Quit' File-menu items 47R With 'ignore bad headers' OFF the bad-headers-counter is now zero 48R 1994 -> 1995 48R Fix a bug that causes a bomb when a user selects 'sesscreen 0 0' 48R Implemented new command 'axtext [<message>]' 48R Implemented new command 'nrtext [<message>]' 50R Added support for AmSoft-CD callsign database 50R ON1XK added a Timer-Task instead of the 'realtime stuff' 51R Some mods for the new 'timer task' 51R When sessions are open at Quit-time, ask Quit-permission 51R Try to execute 'perform' commands at hh:mm:00 exactly 52R Inform the user about performance reduction when TRACE is ON 52R Some minor enhancements for a number of commands 52R Make NET/Mac aware of 'popmail' 53R Some cosmetic mods for popmail 53R InactiveTimer implemented for popmailsessions 54R 'netmacicons' now also defines the icontype of 'source'-files 54R Added command 'domainname' 54R Added a mailfile-size-limit to the popmail command 55R Support 'ftext3 [<text>]' and 'ftext4 [<text>]' commands 56R Implement 'whenquiet <command>' command 56R Implemented some temporary mods to keep track of sleeping sessions 56R Implemented some mods for the 'tzone' command 56R Implemented a minor mod for the 'sourcewhendone' command 57R Implemented a minor mod for the 'sourcewhendone' command 58R 'addmenu' mod to allow APRS beacon formats. See HELP 58R Implemented some temporary mods to keep track of sleeping sessions 78 mbuf.c Make sure pullup() gets called with the right parametertype 16R New version received from PE1CHL to fix DUP mbuf problem 34R Removed old version of mbuf.c 16R mbuf.h New version received from PE1CHL to fix DUP mbuf problem 09R MyAddResMenu.c Fixes for AddResMenu() bug in System 7.1 11R Do NOT compile this if HELP is not defined in config.h 46 netrom.h Do extended printing of 'netrom rout' command-output + netuser.c Add conversion-routine for ip-number to callsign 80 Show a WatchCursor when going through hosts.net 82 Slow down the rotating cursor 83 Show a WatchCursor when going through hosts.net 19R Ignore comment at the end of hosts.net lines 24R Call cursor routines in the right way 40R Enhance syntax-checking for 'IP-number'-style parameters 45R Speed-up hostname lookups from the hosts.net file 46R Speed-up hostname lookups from the hosts.net file 54R <hostname>.<domainname> is now the same as <hostname> + netuser.h Define inet_n2h() and phsocket() 33 nr3.c Changed some NET/ROM constants 46 Do extended printing of 'netrom rout' command-output 59 Make syntax of error- and usage-messages more consistent 78 Make sure pullup() gets called with the right parametertype 30R Implemented 'ignorebadheaders [on|off]' command 33R Fix for 'ignorebadheaders'stuff 73 nr4subr.c Implement fixes for more 'Real-Time processing' 78 Make sure pullup() gets called with the right parametertype 73 nr4user.c Implement fixes for more 'Real-Time processing' 73 nr4.c Implement fixes for more 'Real-Time processing' + nr4.h Fix 'bomb' bug in NET/ROM-sessions + nrcmd.c Fix 'bomb' bug in NET/ROM-sessions + NETOM is now NETROM in 'window'-menu + Mods for UPLOAD command 42 Do flowcontrol for incoming lines and those typed 31 Force 'Connected' message to NET/ROM-window 46 Do extended printing of 'netrom route' command-output 46 Do extended logging 48 Incoming sessions draw more attention than incoming mail 58 Make syntax of error- and usage-messages more consistent 59 Make syntax of error- and usage-messages more consistent 60 Save some space by moving some strings to 1 variable 60 Make syntax of error- and usage-messages more consistent 64 Don't allow NET/ROM on non-NET/ROM interfaces 67 Cursors should appear only if typing in a window is allowed 68 Implement split-windows for TELNET, AX.25 and NET/ROM 69 Seconds should be milliseconds in some command-responses 70 Use strcpy() all over the place 72 Change code so that it becomes more ANSI-like 73 Implement fixes for more 'Real-Time processing' 04R Enable/disable Custom menu depending on frontwindow 15R Return resultcode 0 if all was OK 19R Mods for correctly displaying the systemprompt 23R 'netrom nodefilter' command also shows nodefilter mode 48R Implemented new command 'nrtext [<message>]' 49R Fixes for 'nrtext [<message>]' 49R Redo of one of the subroutines 55R A cosmetic enhancement for the 'netrom nodefilter' output 78 nrs.c Make sure pullup() gets called with the right parametertype 47R In case of I/O-errors also display interface-name 78 nrsubr.c Make sure pullup() gets called with the right parametertype 42R ping.h Support 'rdate' command 51R Mods for variable-length ping's 52R popmail.c Make NET/Mac aware of 'popmail' 53R Some cosmetic mods for popmail 54R Added a mailfile-size-limit to the popmail command 55R Don't record the 'retr n' command in the mail-file 57R Added mods to support more POP-servers 50R read_amsoft.c Support AmSoft CD-ROM 73 rip.h Implement fixes for more 'Real-Time processing' + session.c Mods for UPLOAD command 36 Mods for RECORD command 58 Try not to expand inactive sessions 59 Make syntax of error- and usage-messages more consistent 59 Allow 'record|upload <filename> <sessionnumber> command 59 Fix 'close'- and 'session'-command for current session 60 Save some space by moving some strings to 1 variable 62 A <RETURN> switches back to the last session (by AF2J) 62 Change name 'back_to_console' into 'lastActiveSession' 68 Implement split-windows for TELNET, AX.25 and NET/ROM 71 Implement 'rtntoses [on|off]' command 77 Redraw window after switching to another one 04R Enable/disable Custom menu depending on frontwindow 14R Implemented mods for password blanking 15R Mods for Password-blanking 27R Recording a session should result in a TEXT-file, single-spaced 28R Disable 'Custom' menu when showing a 'Finger' session 38R Add support for 'Text Capture FKEY' for slit-windows 39R OUT windows in a split-window session were sometimes hidden 54R Some cosmetic mods for netmacicons 68 session.h Implement split-windows for TELNET, AX.25 and NET/ROM 14R Implemented mods for password blanking 41R Mods to prompt for username and password 42R Fix for mods that prompt for username and password 43R Fix for mods that prompt for username and password 44R Display transmissiontime and -speed at the end of an ftp get/put 47R slfp.c In case of I/O-errors also display interface-name 78 slip.c Make sure pullup() gets called with the right parametertype 25R Fix a problem, that was caused by SoftKiss 1.6 26R Fixes for a problem, that was caused by SoftKiss pre1.8 47R In case of I/O-errors also display interface-name 30 smisc.c Support remote-reboot 14R Check the result of the time() function 15R Return resultcode 0 if all was OK 32R Flush open files at 'remote-reboot'-time 41R Password-protect 'remote <hostname> reset' command 50R ON1XK added a Timer-Task instead of the 'realtime stuff' + smtpcli.c Fix SMTP-timer sometimes showing wrong timervalue 38 removed.. Make sure mailfiles are sent 'first in first out' 39 Log ALL outgoing mail 49 Also show hostname in some SMTP messages 58 Make syntax of error- and usage-messages more consistent 59 Make syntax of error- and usage-messages more consistent 60 Make syntax of error- and usage-messages more consistent 67 Mods for 'SMTP trace' window 67 Allow the user to define location and size of SMTP window 67 Cursors should appear only if typing in a window is allowed 72 Make sure windows update properly even when not in front 73 Implement fixes for more 'Real-Time processing' 78 Make sure pullup() gets called with the right parametertype 01R Mods for smtpndays 02R Mods for smtpndays 04R Enable/disable Custom menu depending on frontwindow 10R Force window-updates only if NET/Mac is not suspended 12R Fix pathnames for old Mac512 14R Check the result of the time() function 15R Return resultcode 0 if all was OK 18R fflush() SMTPXXXXX tempfiles and disk-cache after fclose() 21R If mail can't be delivered, report the name of the destination 23R Make sure 'smtp timer 0' stops smtp timer until further notice 26R Introduce 'smtp vm' command to cure the SMTP problem in IBM's VM 26R The command 'smtpndays [<#days>]' is now 'smtp ndays [<#days>]' 32R Implemented 'smtp multi' command 33R 'smtp ndays 0' now disables checking for the age of a mailfile 34R Enhancements for hop-to-hop delivery of reply-mail-files 40R Make sure mailaddresses look like: ...%...%...%...%...@... 51R Make sure expired smtp-timers restart at 0 55R Corrected some more minor things 55R Use ARPA-net date-format to calculate the age of outgoing mail 55R Return mail that has no hostname for destination 26 smtpserv.c Put machineType in smtp's share and enjoy message 38 Make sure mailfiles are sent 'first in first out' 48 Incoming sessions draw more attention than incoming mail 54 Try to optimize outgoing mail as much as possible 56 Fix typo, that accidently terminated an IF-statement 65 Remove any existing controlcharacters in <user@.....> 66 Increase size of ourname[] for longer Macintosh names 78 Make sure pullup() gets called with the right parametertype 80 Show a WatchCursor when mailing files 01R Mods for smtpndays 02R Allow only 1 incoming SMTP from a given host, kill the others 08R Prepare for longer Macintosh names (like: PowerBook DUO 230) 09R Eventually supply 'alias' with the right Icon 09R Do the Icon-change based on the new 'netmacicons' command 10R Support mail-delivery over AppleShare 12R Fix pathnames for old Mac512 13R Don't report failing AppleShare mail-delivery 14R Check the result of the time() function 15R Return resultcode 0 if all was OK 18R fflush() SMTPXXXXX tempfiles and disk-cache after fclose() 19R Mods for correctly displaying the systemprompt 22R Undeliverable mail should be returned hop-to-hop 23R New command 'dontalias <user> [<user>] [<user>] ....' 24R Call cursor routines in the right way 25R Don't dynamically alias 'mailer-daemon' 26R Assign 0L instead of 0 to long int variable 'sequence' 27R In case we cannot get sequence.seq... delay and try again 27R Don't generate duplicate callsigns for hop-to-hop addressing 29R Make sure the universal temp-file has a NET/Mac Icon 30R Include MacOS- and NET/Mac-versionnumbers in SMTP headers 30R Sleep no longer (kind of) freezes the Mac 31R AppleShare delivery now also changes the From: address 31R Bugfixes for 'dontalias' command 32R Prepare for longer Macintosh names (like: PowerBook Duo 270c) 32R Implemented 'smtp multi' command 34R Enhancements for outgoing-mail-optimizer 34R Enhancements for hop-to-hop delivery of reply-mail-files 35R Improved the generation of dynamic aliases 37R Some conditional mods for my own private internet-link 39R Improved the generation of From addresses for hop-to-hop 39R Mods for Power Macintosh models 40R Improved the generation of From addresses for hop-to-hop 45R Let the watchcursor spin while copying mail-files 45R In case of problems send a more explaining message to the screen 47R Mods to fix an appleshare-mail-delivery problem 48R Moved some local debug-mods to separate files 51R Mods to fix a mail-delivery problem 54R Some cosmetic mods for netmacicons 54R <hostname>.<domainname> is now the same as <hostname> 35 smtp.h Prevent from crashing when long SMTP lines come in 38 Fix for mailfiles that have 8 character long names 01R Mods for smtpndays 13R Forget about the stupid MS/DOS 8 character filenames 21R If mail can't be delivered, report the name of the destination 55R Return mail that has no hostname for destination 27 tcp.h Implement new 'max_retry_timer' (tcp mrtt [milliseconds]) 03R Mods for inactiveTimer 48R 'tcp mss' is now 216 by default 48R 'tcp window' is now 432 by default + tcpcmd.c Show callsign:socket in 't s' command 20 Show control-block numbers in 't s' command 20 Allow 'tcp <type> <block-number>' commands 27 Implement new 'max_retry_timer' (tcp mrtt [milliseconds]) 57 Enhance 'tcp irtt' command to show cashed stuff 58 Make syntax of error- and usage-messages more consistent 59 Make syntax of error- and usage-messages more consistent 68 Don't reset a 'Closed' session because this will crash NET/Mac 70 Implement 'tcp active' command (suppressed 'tcp status') 70 Implement 'tcp extended' command (extended 'tcp active') 73 Implement fixes for more 'Real-Time processing' 07R Show inactiveTimer in 't s #' command-output 41R Truncate hostnames that are too long to be printed 43R Align the output of 't s' for large-memory Macintoshes 45R Don't accept 'tcp reset' commands for sockets in 'Listen' state + tcpdump.c Support 'trace <interface> <bits> [filename]' 57 tcpin.c Implement cashing of rtt settings (by AF2J) 73 Implement fixes for more 'Real-Time processing' 78 Make sure pullup() gets called with the right parametertype 33R Some more 'enhancements' for q-and-d AppleTalk-fix 35R Some more 'enhancements' for q-and-d AppleTalk-fix 53R InactiveTimer implemented for popmailsessions 50 tcpip.π.rsrc Taken from V2.2 + HELP-info added/changed over various releases of NET/Mac 80 Added 'rotating cursor' 27 tcpout.c Implement new 'max_retry_timer' (tcp mrtt [milliseconds]) 44 Make sure counters remain positive 73 Implement fixes for more 'Real-Time processing' 82 Try to keep the retry-timers AT LEAST 5 seconds 27 tcpsubr.c Implement new 'max_retry_timer' (tcp mrtt [milliseconds]) 57 Implement cashing of rtt settings (by AF2J) 73 Implement fixes for more 'Real-Time processing' 03R Mods for inactiveTimer 32 tcptimer.c Make sure counters remain positive 01R Mods for smtpndays 02R Mods for smtpndays 23R Enhance checking for obsolete open sessions 55R Terminate idle popmail-sessions after 127 retries 78 tcpuser.c Make sure pullup() gets called with the right parametertype 30R A quick and dirty attempt to solve the 'slow AppleTalk' problem 31R Bugfixes for q-and-d fix 32R Some more 'enhancements' for q-and-d fix 35R Some more 'enhancements' for q-and-d fix 49R Support new command 'route window <hostname>' 50R ON1XK added a Timer-Task instead of the 'realtime stuff' 57 tcp_rtt.c New sourcefile for cashing of rtt settings (by AF2J) + telnet.c Mods for UPLOAD command 25 Force incoming data to the right window 29 Close <session> doesn't crash a Mac with minimum system 42 Do flowcontrol for incoming lines and those typed 51 Force state-changes to the right window 68 Implement split-windows for TELNET, AX.25 and NET/ROM 55 Log outgoing telnet-session 60 Save some space by moving some strings to 1 variable 67 Cursors should appear only if typing in a window is allowed 78 Make sure pullup() gets called with the right parametertype 14R Don't send incoming null-characters to the TELNET-session-window 21R Log reason for closing a session in case of networkproblems 52R Make NET/Mac aware of 'popmail' 53R Some cosmetic mods for popmail + timer.c Mods for reboot-problem 49 If smtp timer > 3276 (*10 mSec) no smtp kick occurred 73 Implement fixes for more 'Real-Time processing' 74 Add some conditional debugging code 09R Mods for the statistics window 14R Check the result of the time() function 22R Don't allow msPTick > 1000 or 'division by zero' may occur 50R ON1XK added a Timer-Task instead of the 'realtime stuff' 52R Just some minor mods to trace a timer-hung problem 73 timer.h Implement fixes for more 'Real-Time processing' 52R Just some minor mods to trace a timer-hung problem + tnserv.c Display callsign not ip-number on incoming telnet-session 48 Incoming sessions draw more attention than incoming mail 60 Save some space by moving some strings to 1 variable 67 Cursors should appear only if typing in a window is allowed 68 Implement split-windows for TELNET, AX.25 and NET/ROM 04R Enable/disable Custom menu depending on frontwindow 15R Return resultcode 0 if all was OK 19R Mods for correctly displaying the systemprompt 21R For incoming TELNET-sessions send out CTEXT1 and CTEXT2 22R Limit the number of TELNET sockets and keep track of those 32R Output <RETURN><LINEFEED> at end of CTEXT1 and CTEXT2 + trace.c Support 'trace <interface> <bits> [filename]' 46 Show date and time while tracing 52 Support 'traceonly [all|callsign]' 53 Mod for trace <interface> 111 (211 was OK) 78 Make sure pullup() gets called with the right parametertype 14R Check the result of the time() function 41R Change double linespace to single space in TRACE-files 42R Fix error in TRACE-output, introduced in 2.3.41 14R trace.h Implemented mods for Serial Line Framing Protocol 78 udp.c Make sure pullup() gets called with the right parametertype 82 Fix sporadic odd address errors 14R Make sure udp.c uses iface.h 44R Let UDP report 'port unreachable'... TRACEROUTE needs that... + udpdump.c Support 'trace <interface> <bits> [filename]' 76 Lots of files Installation of conditional sourcecode-compilation and removal of non-Mac sources 12R Mods for MFS-only Macintoshes 14R Mods for MFS-only Macintoshes 15R Mods for MFS-only Macintoshes 15R Return error-code 0 if all was OK 30R Removed some #ifdef's and #endif's 46R Support 'fontsize' command 47R Some mods for ROSE and low-level AX.25 as suggested by K5JB Priority 1 (known bugs) none 2 Scrollable windows... Will be very hard to implement... 2 Support for lzw compression (smtp) 2 Domain nameserver (won't be easy to implement either...) 2 Control-X should terminate a C)hat; back to the mbox 3 Support for lzw compression (ftp) 3 NET/ROM Support NET/ROM connections over AppleTalk links 3 AX.25 Support AX.25 connections over AppleTalk links 3 FTP Support type ahead of commands 4 UPLOAD Fix NET/ROM uploads 5 SMTP Allow mailforwarding to RLI/MBS-boxes ? Support for encapsulated packets for gateways */ /* About some new things and new (or changed) commands and how to use those: UPLOAD and RECORD: Switch from the AX.25- or TELNET window to the console window and type 'UPLOAD <filename>' or 'RECORD <filename>'. So make sure you go from the window for which the UPLOAD/RECORD is intended DIRECTLY to the console window, otherwise you'll get an errormessage. In NET/Mac(58) and higher versions you may also use the format: upload <filename> [<session>] and record <filename> [<session>|off] ROUTE EXPANDED: Displays the routing table like the ROUTE command does, but IP-numbers will be translated into hostnames. This may take some time because the hostnames have to be looked up in the HOSTS.NET file. I suggest you just use this form when you have a RAM-cache enabled in your controlpanel. Oh... you cannot type a shortcut for EXPANDED, so 'ro e' will not work. This is just to prevent one from accidently typing this command. TCP MRTT [<milliseconds>]: You may use this new command to set a Maximum ReTry Timer. The default time is 3600 seconds (3600000), which means that when a link has gone down, or has gone bad, there will be a retry at least once every hour. This timer was created so that the retry- timer doesn't go up too high. Don't set this timer to a (too) low value, because you may introduce a lot of retries for a down link, which means a lot of unnecessary traffic on the frequency. This MRTT is valid for ALL open connections. I suggest you DON'T set it to a value lower than 900000 (900 seconds) or so. #$debug on: You may choose to list the commands in the autoexec.net-file when they are being executed. This is very handy to trace errors in the startup-file. NET/Mac will start showing the commands when it discovers a line containing #$debug on in the autoexec.net file. FLOW [ON|OFF]: Enable or disable 'flow-control' for TELNET-, NET/ROM- and AX.25-sessions. With flowcontrol ON an incoming line will not be written to the screen as long as you are in the middle of typing a line for the remote station. Incoming data will be displayed as soon as you hit the <RETURN> key. So far flowcontrol is not perfect, but I think it is a lot better than it used to be. Anyway, it works fine, as long as you don't type HALF a line in one session, and then switch to another and do some typing there, and then switch back and so on. If you simply type a COMPLETE line at a time it's OK. ALERTS [<number>]: Sets the number of bell-strikes for incoming sessions. <number> may be a number from 0 to 5. When <number> is 0, no bell will sound for incoming sessions or incoming mail. When <number> is bigger than 0 incoming mail will sound 1 bell (like it used to be), but incoming live sessions like TELNET-, AX.25- and NET/ROM-sessions will sound as many bells as defined in the ALERTS command. This command was created so incoming sessions may draw more attention than incoming mail- or finger- sessions. At startup the program prints out a line containing the Macintoshtype and two type-numbers. If it says 'Macintosh Computer', then please inform me about the type of Macintosh you are running NET/Mac on (like Plus, SE etc.) and the typenumbers it printed, so that I can add the Macintoshtype you are using. So far it should recognize most of the Macintoshes. Note that a Mac-XL running a Mac Plus emulator, or a 512Ke with a SCSI- interface and/or 1 MByte of memory (or more), are considered to be a Plus! TRACEONLY [ALL|CALLSIGN] allows you to only expand packets to or from a given station (doesn't work for AppleTalk-tracing). This 'option' was installed because sometimes, on a very busy channel, it used to be close to impossible to return from the trace-window to the console-window (in order to switch tracing off). OUTGOING-MAIL-OPTIMIZER: NET/Mac(54) and higher versions contain an 'outgoing-mail-optimizer'. It performs the following task: Suppose someone sends me (pa2aga) ONE mail for a number of hams, like: To: pe0mar@pa2aga pa0aax@pa2aga pa0gln@pa2aga on1xk@pa2aga Now, what used to happen is the following: Using the alias-file of pa2aga, mail would be re-queued to: pe0mar@pi8hvh pa0aax@pi8hvh pa0gln@pi8mac on1xk@pi8hvh 4 files in total, of which 3 would be sent (one after another) to pi8hvh. I always thought this was a waste of bandwidth, so... My optimizer does the trick now, NET/Mac takes care of it all! It will send one file to pi8mac and ONE file to pi8hvh! RIP TRACE [ON|OFF]: Allows you to trace RIP-activity in a RIP-dedicated Window. These mods came from Joe AF2J (thanks Joe!). Note that when A LOT of routes get added through the RIP-mechanism, the RIP-trace-window may slow down NET/Mac for a while, because (like ROUTE EXPANDED) all IP-numbers will get translated to hostnames before the messages in the RIP-trace window are displayed. This may require some (a lot) of disk-accesses when the file 'hosts.net' is not in a RAM-cache. I suggest you turn on the RIP TRACE when indeed you want to trace the RIP-stuff, otherwise turn RIP TRACE OFF. We have experienced some outgoing CHECKSUM ERRORs on both AppleTalk and TNC links. This problem causes AppleTalk links to become very S L O W. To minimize this problem I have set both TCP MSS and TCP WINDOW to 216 so that there will never be more than 1 frame at a time going out over the AppleTalk link. This seems to have reduced it by 95%. Unfortunately MSS and WINDOW are being used for all tcp-connections, so setting both of them to the same value also limits the possibilities on the TNC-link, but as far as I've noticed here that doesn't really hurt. PE1CHL told me that the CHECKSUM ERROR problem also exists in his NET.PE1CHL, and that he is not going to solve it. He believes that it has been solved in NOS. For SLIP-lines you may now issue modemcommands like ATDT in a 'param' command. The format of the command is: param <interface> <modemcommand> Examples: param sl0 ATDT031174942153 param sl0 +++ Note: Only 1 string is sent to the modem. A <space> or <return> terminates the string. For KISS-lines you may now issue TNC-commands like KISS ON in a 'param' command. The format of the command is: param <interface> <TNC-command> Example: param ax0 KISS ON Note: A <return> terminates the string. A new feature in NET/Mac(65) and higher is the 'anonymous anonymous' user. You can allow any user to log in by defining username * and password * in the ftpusers-file. When NET/Mac goes through the list of validated users, and it encounters a username *, then the search is terminated and the user is granted access to the system. You should put this line at the very end of ftpusers! You may also choose to remove any 'guest' or 'anonymous' user from the ftpusers-file, since * could cover all of those. Also new in version 65 is the 'prompt' command, which enables you to change the default 'net>' prompt. Version 67 and higher allow the user to define the location and size of the Trace-, RIP Trace-, LOG-, SMTP Trace- and CONSOLE-windows. If you haven't changed the commands that generate these windows, the windows will simply be like they used to be. If you want to change the size or location of a given window, simply add 4 numbers to the command, that creates it. (e.g.: log :spool:logs:log x y r c) The 4 numbers are: x and y: the coordinates of the upper left corner default is 0 0 r : number of rows (lines) in the window default is 24 (on a 9" screen) c : number of columns (characters) per line default is 80 (on a 9" screen) Since the TRACE-command has an optional filename as the last parameter, it is required to use all 4 parameters (x y r c) for the windowsize or NON of those. The optional filename remains the LAST parameter. To change the location and size of the console-window a new command 'console [x y r c]' was introduced. I myself use on a 9" screen: rip trace on 0 0 24 72 smtp trace 2 0 19 17 80 log :spool:logs:log overwrite 0 0 24 71 console 0 0 13 80 Example for 13" screen: rip trace on 0 0 24 80 log :spool:logs:log overwrite 0 310 3 80 smtp trace 2 0 374 3 80 console 0 0 24 80 Starting up NET/Mac with #$debug on may be pretty slow, especially when you have a large screen (let's say > 12"). If you want to speed up processing of the autoexec.net file you can first reduce the size of the console-window. On PA0GLN's Mac LC with 13" color-screen the startup took 24 seconds. He then installed the following line as the first line of his autoexec.net: console 0 0 5 80 At the end of his autoexec.net he selected the screen as suggested above. Startup then took only 15 seconds. FLOW [ON|OFF] now also controls the kind of screen you will get when an AX.25-, NET/ROM- or TELNET-session is started. With FLOW OFF you will now get a split-screen, with an incoming and an outgoing window. When FLOW is ON, you will get one window in which both the incoming and outgoing data will be displayed. KPC-4 TNC: When a kpc-4 is attached, an "a" or "b" is added to <label> and is used in place of <interface> in all autoexec.net (and live) commands. So, when you do 'attach kpc4 1 a ax25 kp0 2048 576 4800' your <interface>'s will be kp0a and kp0b. RTNTOSES [ON|OFF] allows you to enable/disable a mode in which typing a single <RETURN> in the console-window will/won't bring you back to the active session. Default is ON. REALTIME [ON|OFF] was implemented because I discovered, that timers appeared to be only relative values. When the Mac is busy running more than just NET/Mac, sometimes my timers (like SMTP TIMER, retry-timers etc.) look like actual values, but in many cases the real value was 1.5 to 3 times higher than the ones shown by various commands. I always wondered why a ping with a delay of 900 seconds only got handled about twice an hour.... When you switch on REALTIME, NET/Mac will try to investigate how busy the Mac is, and how little time NET/Mac gets from the system. By doing so and adjusting the timervalues these become more realistic. NET/Mac will average the values it found over some time. When you type REALTIME, it will show you the value it has calculated. The program usually uses the value 100, so if REALTIME shows 200 mSec per tick, this means, that all timers and counters are twice as long as you would expect. Also look at SMTP TIMER some time after switching on REALTIME, and you will see a more accurate value of the timer there. When you quit NET/Mac by using the 'exit' command, NET/Mac will put the average tick-value of the last NET/Mac-run at the beginning of your autoexec.net, so that it will automatically start up using this value when you activate NET/Mac the next time. !!! The REALTIME command, described above, is no longer supported !!! !!! Instead of this command ON1XK implemented a timer-task, which !!! !!! forces the clock to tick at exactly 100 millisecond intervals. !!! !!! This timer task may not work (at all) on a Mac 128 or 512, or !!! !!! when using pre 6.0.4 versions of the Mac Operating System... !!! !!! If this causes you problems, then I can send you a version of !!! !!! NET/Mac that does NOT use the timertask, but has built in sup- !!! !!! port for the REALTIME command instead... Just let me know... !!! CMDTOCLIPB [ON|OFF] appears to be handy when you want to have a possibility to redo the last command. This new command allows you to copy each and every command to the clipboard, so that you can 'retype' the command by simply pressing command-G (Do Again). It's a lot more comfortable to type (a lot of) command-G's than to type like 't s 5f873c' a number of times, just to monitor a given session. Command-V acts just like command-G, but the command will not really be executed, so that you can edit the command if you like. RIP really works in version 80 (and higher)! ADDMENU <string> allows you to enter commands from the menubar. Look at the HELP info for ADDMENU for more info. SOURCE <filename> allows you to split up the autoexec.net file into a number of smaller files, each performing a specific task, like 1 file for 'route add' commands, 1 file for 'arp add' commands etc... Also you may choose to group together a number of NET/Mac commands, that can be activated later from the 'Custom' menu. See also the NET/Mac HELP-windows for 'addmenu' and 'source'. SMTP NDAYS <number> will make sure, that SMTP-files that have been inside your Macintosh (and could not be delivered) for more than <number> days, will get returned to the sender. The default value for <number> is 365 (days), but I think you should set it to some value of between 10 and 30. Mail-files are being checked against this <number> when they are queued for transmission. When NET/Mac stays on for very long without being restarted, this could mean, that there may be a session, waiting in SYN SENT mode for the destination to show up, for as long as NET/Mac is running. This would mean, that the outgoing mail to that (unreachable?) destination will only get queued when SMTP kicks for the first time, and never after. Therefore I implemented a mod, which makes sure that outgoing SMTP-sessions that reach retry-timer 128 (see 'tcp status') will get requeued again. Also outgoing SMTP-sessions that wait for a command from the destinationhost and seem to be 'forgotten' by that host will be reset after about 2 hours. TITLE <new consolewindow title> allows you to change the default title of the console-window (which now defaults to 'hostname') to any title you like. Sometimes it seems hard to disconnect a simple AX.25 connection by just typing a disconnect command... Instead of typing disconnect commands over and over, you should try the following: type: ax25 status and then type: ax25 reset <'&AXB'-address> You should ONLY use these commands, when the state of the connection is (and remains) 'Conn pending', otherwise the remote-station will never know, that you have dropped the connection. SLEEP <seconds> was added to allow users to put NET/Mac to sleep for some time. Sometimes this seems to be necessary after sending a command (like RESET) to a TNC. During the sleep period, which may last between 1 and 60 seconds, NET/Mac will not service any ports. NETMACICONS [ON|OFF] allows you to control the type of Icon that the NET/Mac configurationfiles will have. When switched to ON, files like 'ftpusers', 'alias', 'hosts.net' and 'autoexec.net' will eventually get a NET/Mac-like Icon. Some users did not like this because they would like to see TeachText or some other file-editor launched (instead of NET/Mac) whenever they double-click on the very file. When you decide to change the creator of the file to the NET/Mac application, the filetype will still remain TEXT, so that any editor will be able to edit the file. I myself changed the Icons to NET/Mac-like Icons, because I feel these files are really NET/Mac configuration files, and therefore should look like NET/Mac-documents. The default for NETMACICONS is ON. System 7.1 has a bug in AddResMenu() that messes up the HELP-window. NET/Mac now has it's own MyAddResMenu() to fix that. NET/Mac will check if it is running under 7.1 and if so it uses it's own routines, otherwise the system's AddResMenu will be used. Under the 'Settings' menu a new item '...View Statistics' was installed. This allows you to display a window, in which the realtime statistics are shown. For some reason I don't understand yet, background tasks will slow down a lot when this window is up, and therefore it 'self-destructs' in 15 seconds. I am still looking for the cause of this and will try to solve the problem as soon as possible. APPLESHARE [<HOSTNAME> <PATH_TO_MQUEUE_FOLDER>] was implemented in version 2.3.10. I wrote this command because I got sick of having to deal with badly performing AppleTalk TCP/IP links. The bad links are caused by some 'DUP MBUF' problem, which happens to occur much more on AppleTalk than on TNC-links. I think the problem rises when an ACK for a frame was received before the frame itself has been deleted from the outbound-frame-queue. Of course the chances, that this will happen on AppleTalk are relatively large because of it's high speed. On my network it happens most of the time when one of my Mac 512Ke's transfers SMTP-files to the IIx or SE/30. The IIx and SE/30 seem to ACK so quick, that the 512 doesn't have enough time to remove the transmitted frame from the queue. The new command allows the 512 to directly put the file to be transmitted into the MQUEUE folder of the IIx using AppleShare instead of the TCP/IP link. Sending out a 585K file took 7 minutes over TCP/IP, while the transmission lasted only 2.5 minutes over AppleShare. Bad links sometimes perform so bad, that I cannot get more than about 5K sent in ONE HOUR! For the time being, you can define only 1 AppleShare host. In my case this did not appear to be a problem, because usually one Mac only forwards mail to one of the others. This happens to be the case since in Holland we are used to do hop-to-hop forwarding, and when mail comes in on one of the Macs it will be forwarded to the 'next in line' and to the next etc. So only the 'next in line' Mac has to be defined as AppleShare host. If for some reason the Apple- Share volume appears to be not-online, then NET/Mac will use TCP/IP-forwarding automatically. | Suppose mail comes in at pa2aga for | pa3ecp@pa2aga. The aliasfile of pa2aga A | will reroute that to pa3ecp@pi8mac. p |--- pa2aga on 433.025 MHz. -- TNC pa2aga has 1 AppleShare node: pi8mac, p | so the mailfile will (if possible) be l | alias: pa3ecp pa3ecp@pi8mac forwarded over an AppleShare link. e | T | pi8mac discovers the mail in it's own a |--- pi8mac on 430.675 MHz. -- TNC mqueue-folder, while it is still l | addressed to: pa3ecp@pi8mac, and will k | alias: pa3ecp pa3ecp@pa2aga-2 send it over the loopback-link to | itself. Then it will get aliassed to c | pa3ecp@pa2aga-2, while pa2aga-2 is it's a |--- pa2aga-2 on 1259.675 MHz. -- TNC known AppleShare node. Therefore, again b | it will be sent over via AppleShare. l | alias: pa3ecp pa3ecp@pa3ecp e | Finally pa2aga-2 encounters mail for | pa3ecp@pa2aga-2, and will send it to itself. The mail will then be rerouted to pa3ecp@pa3ecp and will finally be delivered over the TNC-link. pa2aga-2 knows 1 AppleShare node: pa2aga example of the APPLESHARE command as it is in the autoexec.net of pa2aga: appleshare pi8mac "HD of PI8MAC:TCP/IP:spool:mqueue" Note: AppleShare mail-delivery will take place ONLY if the file gets QUEUED by NET/Mac (like in hop-to-hop forwarding). If you just typed a mail yourself, then IM/Mac will queue it. Therefore the first hop will go over a TCP/IP link while all next (AppleTalk-)hops may be using this AppleShare feature. I may decide to enhance this, but will not do so until the system has proven to REALLY be an enhancement. So far my AppleTalk TCP/IP links have been running well with this mod, and I'll keep my fingers crossed! We've tested this feature on standard AppleShare-volumes as well as TOPS-volumes. NET/Mac 2.3.14 contains new AppleTalk drivers. So far these seem to be much more reliable than the old drivers. I just want you to know that: 1) You cannot mix NET/Mac 2.3.14 and pre-2.3.14 versions on 1 AppleTalk trunk, because they will not be able to communicate with eachother 2) When one Mac on the AppleTalk link tries to send to another, while the other one isn't running NET/Mac yet, the first one seems to freeze for maybe half a minute or so, but don't panic... it will continue to run without problems 3) The new NET/Mac may be used to connect to an ethernet-LAN over a Shiva FastPath or Cayman GatorBox. If no such gateway is discovered on the Apple- Talk LAN, NET/Mac will report 'No AppleTalk Gateway was found' when processing the 'attach' command for the AppleTalk port NET/Mac 2.3.15 contains upgraded new AppleTalk drivers. Again you cannot mix 2.3.15 with earlier versions. Furthermore the last number in the attach-statement for the AppleTalk interface cannot be larger than 586, so 600 is invalid for NET/Mac 2.3.15. Dewayne WA8DZP, who sent me these fixes, wrote about hem: 'When you do a trace for an AT interface now, the AT addresses are displayed in the' 'standard net:node:socket convention for both source and destination. The maximum ' 'packet size in the "attach at0" command should now be 586. This code will find any' 'host running NET/Mac who is in the same AT zone. This should be a BIG improvement ' 'over the old LAP code that could only work over one network. ' NET/Mac also supports point-to-point SLFP, as used by the Merit Network and MIT. Check the HELP-info for the 'attach' command to see how to select SLFP. When you have just started up an FTP-session and you have typed: USER <username> you can now type your password without showing the password on the screen. To do this DON'T type: PASS <password>, but simply type: PASS and the system will ask you to type a password. The password will not be visible on the screen. If you decide to use the old form (PASS <password>) the password WILL be visible! SESSCREEN [<screenwidth>] [<number_of_lines>] allows you to define the width and length of windows that will be opened for ftp-, telnet-, ax.25-, net/rom- and finger-sessions. The maximum size depends on the size of the screen. I figured out, that 90 by 25 is nice on my PowerBook 100, while the screen can be 101 characters wide by 29 lines long. The drivers for accessing the callsign-database have been changed so that NET/Mac will use the format of (and read) the new HamCall CD-ROM. Old callbook databases, that could be used by pre 2.3.15 versions of NET/Mac cannot be used any longer. HamCall CD-ROM: 500,000 hams plus 1,000s of public domain amateur radio programs and data. NOW with international callsigns!! CD-ROM $50 Shipping $5 Buckmaster Publishing Route 4, Box 1630 Mineral, VA 23117 (703)894-5777 (800)282-5628 After buying the october 1992 Buckmaster CD I discovered, that the databases are in an invisible folder. You can attach the U.S.A.-database using a command like: callbk HCALL_10_92:HAM0:HAMCALL.129;1 :spool:logs:callbook_log ^ ^ ^^^^^^^^^^^^^^^^^^^^^^^^ these are zero's just an example The international callbook file is encoded. To use it from NET/Mac you must use: callbk HCALL_10_92:HAM0:HAMCALL.ALL;1 :spool:logs:callbook_log encoded CALLBOOKSERVER <HOSTNAME> defines the callbook-server in your area. It is set to your own hostname by default. The 'inquire' command will retrieve the callbook-database at the station, which is defined by the 'callbookserver' command. INQUIRE <CALLSIGN> allows you to retrieve the callbook-database of a predefined callbook-server. The output is exactly the same as delivered to an ax.25- or NET/ROM-user, who sends an I)nquire <callsign> command to the mbox, or a TCP/IP- user who sends a 'finger %<user>@<callbookserver>'. CTEXT1 [<MESSAGE LINE 1>] and CTEXT2 [<MESSAGE LINE 2>] allow you to send out a 2-line welcome message to the station that opens a TELNET-session to this host. If a message is idle, no data will be sent out. Setting or clearing out a message can be done as follows: ctext1 "Welcome to TELNET at PA2AGA" ctext2 "It's past midnight.. everybody is asleep here" or: ctext2 "" FTEXT1 [<MESSAGE LINE 1>] and FTEXT2 [<MESSAGE LINE 2>] do the same as the CTEXT commands, except that these 2 commands will define welcome messages that will be displayed when a new FTP-session gets opened. DONTALIAS <USER> [<USER> ...] enables recording of (so far) unknown aliases in a DynamicAliases file, while these aliases will then be used to reroute mail. It works like this: Suppose K1FRM knows he can send mail to K1TO via K1VIA, while the mail-path to K1FRM is so far unknown at both K1TO as well as K1VIA. K1FRM would then send his mail to: k1to%k1to@k1via (if K1TO is in the aliasfile of K1VIA he could also send it to: k1to@k1via) Now NET/Mac at K1VIA sees this mail coming in and if K1FRM is not defined in the 'dontalias' command (and why should it be?), it will record K1FRM in it's DynamicAliases file. The same thing happens at K1TO. This means that starting now anybody can send mail to K1FRM by simply mailing it to: K1FRM@K1VIA or to: K1FRM@K1TO It is necessary to define your own <USER> in the dontalias command, just to make sure that mail sent out by yourself, but rerouted by someone else and going through your own NET/Mac again will not be looked at. Otherwise an alias for your own <USER> would get written to the DynamicAliases file, meaning that starting now mail to yourself would get rerouted to yourself, and rerouted again, and again and again......... NET/Mac will not record aliases for those <USERS>s, that are already defined in the real 'alias' file. SMTP VM was implemented in version 2.3.26. Scott Petrack <petrack@vnet.IBM.COM> reported a problem when NET/Mac was mailing to an IBM VM mainframe. The mainframe could not handle the way NET/Mac was doing it's SMTP session. When you need to SMTP to such a machine, make sure you use the 'smtp vm' command before you start sending out the first mail. You cannot UNDO this command, but it should work fine for all other implementations of SMTP, except that they may perform just a little slower. If for some reason you are using any version of SoftKISS older than version 1.8 I suggest you add the command SOFTKISS to your autoexec.net file. This command enables some fixes in NET/Mac to take care of a few bugs in SoftKISS, that were solved in version 1.8. NET/Mac 2.3.29 supports the Hurdler HDS 2-port and HQS 4-port serialcards as well as the QuadraLink and QuadraLink DMA cards. This means that starting now you can connect up to 6 TNC's to 1 Macintosh using 1 card or up to 10 TNC's when using 2 cards, etc. Check the modified online-HELP info for both the 'attach'-command and 'quadralink'-command. IGNOREBADHEADERS [ON|OFF] was implemented after I installed the QuadraLink 4 ports serial card, which was given to me by Tom N4ZPT (thanks again Tom!). When using this card NET/Mac sometimes (in my case once or twice an hour) cannot service the card quick enough. Usually this happens when it is busy writing a mailfile to disk. The result is that the first couple of characters in a packetheader may come in in a bad shape, which of course makes the complete packet unusable. The headers found in these packets used to be interpreted and the funny callsigns, that were the result, used to be stored in lists like 'ax heard' and 'netrom route'. When you set 'ignorebadheaders' to on, these faulty packets will be moved to the trash right away. If you want to see when NET/Mac ignores a bad packet (and why), simply use the 'ignorebadheaders on' command twice. In NET/Mac 2.3.32 I somewhat changed the 'tzone' command. A new variant of this command allows you to set the timezone-name, while the offset is taken from the 'Map' control-panel. For more info see the HELP-info inside NET/Mac. SMTP MULTI [ON|OFF] allows you to specify if a given host is allowed to open more than just 1 smtp-session to your station. Usually NET and NOS will only open ONE session at a time. This means that when a second session gets opened, the first one will get reset. Of course this can result in serious problems if a mailer near you decides to use more than one SMTP-session to deliver it's mail. The default mode is (and has been for long...) OFF. PERFORM [CLEAR]|[<COMMAND> <HH:MM>|+<DELAY> [ONCE [<DAYOFWEEK>]]|[PERMANENT]] allows you to define commands, that will be executed at a given time. See HELP for examples and some more info. ROUTE WINDOW <hostname> <tcp-window> can be used to define a non-standard tcp- window size for a given route. A route to <hostname> must have been defined BEFORE the 'route window' command can be used. I myself use this because on one of my Macintoshes the windowsize is 1080, while some stations can only be reached over a very bad path. For these stations I defined a very small tcp-window, and I must say... This mod seems to work very well for these routes! */